BTM-1 Wireless Audio Controller | AUX Input, RCA Pre-Out, IPX5 Rating

USD $128.99
  • Application Type: Marine & Powersports
  • Frequency Response: 20Hz – 20kHz
  • Control Buttons: Power On/Off, Mode Switch, Volume Down & Up, Previous & Next Track, Play/Pause, Sync Button
  • Control Interface: Raised Backlit Rubber Buttons
  • Wireless: Yes
  • Water Resistant: IPX5

SKU: BTM-1-MASC
Category: , ,

Description

One Controller. Total Domination.

If you’ve ever fumbled with your phone on a ride, soaked your stereo in the rain, or reached for a volume knob that doesn’t exist—congrats, you’re exactly who the BTM-1 was built for. This isn’t a gadget. This is your right hand when your left is on the throttle. A rugged, all-weather wireless audio controller designed to bring sanity, simplicity, and sheer volume back into your vehicle, no matter where it goes—or what it goes through.

Flush-mounted and barely-there until you need it, the BTM-1 blends seamlessly into your cockpit while delivering the kind of raw, intuitive control that makes other audio systems feel like toys. With tactile rubber buttons big enough to find blindfolded (or with gloves), a weather-sealed 3.5mm AUX input for your non-wireless throwbacks, and pre-amp RCA outputs that punch clean signal straight to your amplifier, it’s the unsung hero of every off-road build, marine setup, and motorsport rig.

  • Rugged rectangular housing with heavy-duty rubberized buttons built for real-world use—not showroom demos
  • Raised backlit controls shine bright in low-light, low-visibility, and low-patience situations
  • Flush-mount template included for seamless installation into dashes, consoles, or handlebars
  • 3.5mm auxiliary input with protective cap—because not everything in your life should be wireless
  • Wireless Protocol Version 4.2 for instant, reliable syncing with your music source—set it and forget it
  • 0.8V RCA pre-amp output for direct, clean signal transfer to your external amplifier
  • IPX5-rated enclosure protects against water, mud, salt spray, sand, spilled drinks, and poor decisions

You didn’t build your ride to look pretty parked in a driveway. You built it to move, to roar, to feel alive. The BTM-1 is the missing link between your playlist and the pavement (or the waves, or the trail). Stop reaching for flimsy solutions. Stop depending on phones and hope. Control your audio the way you control your machine—directly, instinctively, and with zero apologies.

General
Application TypeMarine & Powersports
Qualitybest
Model SeriesBTM
Model NumberBTM-1
Components
Input3.5mm Stereo Jack
OutputRCA Line Out (0.8V)
Control ButtonsPower On/Off, Mode Switch, Volume Down & Up, Previous & Next Track, Play/Pause, Sync Button
Control InterfaceRaised Backlit Rubber Buttons
Performance
Frequency Response20Hz – 20kHz
S/N Ratio80dB
T.H.D.0.10%
Channel Separation60dB
Installation
Mounting TypeFlush Mount with Template
Mounting Depth1.12 in / 28.4 mm
Product Dimensions (L x W x H)3.82 x 2.13 x 1.14 in / 97 x 54 x 29 mm
Connectivity
WirelessYes
Additional Features
Backlight TypeRed Raised Backlit Buttons
Water ResistantIPX5
Kit Speakers
Speaker Frequency Response20Hz – 20kHz
Speaker Mounting Depth1.12 in / 28.4 mm
Speaker Water ResistanceIPX5

Additional information

Weight 2 lbs
Dimensions 9 × 7 × 4 in
Quality

best

Model Series

BTM

Application Type

Marine & Powersports

Product Category

bt_control

Reviews

There are no reviews yet.

Be the first to review “BTM-1 Wireless Audio Controller | AUX Input, RCA Pre-Out, IPX5 Rating”

Your email address will not be published. Required fields are marked *