FSB10SP Passive Sealed Subwoofer Enclosure | Single 10″ Subwoofer, 200W RMS, 400W Peak

USD Original price was: $190.99.Current price is: $162.99.
  • Application Type: Car
  • Enclosure Type: Passive Sealed
  • Size & Type: 10″
  • Power Handling: 200W RMS / 400W Peak
  • Frequency Response: 35Hz – 500Hz
  • SPL @ 1w/1m: 90 dB
  • Impedance: 4 Ohm

SKU: FSB10SP-CAEN
Category: , ,

Description

Pure Power, No Limits — The FSB10SP Passive Sub Box

For those who believe in building their system from the ground up, the FSB10SP is your foundation of thunder. This 10-inch passive sealed enclosure doesn’t come with an amp — and that’s the beauty of it. It’s made for the purists, the customizers, the sound architects who demand full control over every watt, every wire, and every drop of bass.

  • Raw Bass Potential, Ready to Be Unleashed: With a 200W RMS and 400W peak power handling, the FSB10SP is a powerhouse waiting for the right amplifier to bring it to life. Feed it well, and it’ll reward you with clean, gut-punching bass that fills your vehicle like a tidal wave.
  • Sealed Enclosure for Tight, Accurate Hits: Built with a sealed subwoofer box architecture, this enclosure is engineered for accuracy — delivering defined, responsive bass without the boominess. Perfect for music lovers who crave precision as much as power.
  • FSB Signature Styling — Aggression Meets Elegance: Draped in premium black carpet and boldly embroidered with Cadence’s iconic orange branding, the enclosure exudes modern muscle. Its forward-facing 10” woofer is shielded by an ABS grille with a sharp, armored design that instantly elevates your trunk aesthetic.
  • Wedge-Shaped, Space-Friendly Form: At just 5.2 to 7.3 inches deep, the angled enclosure hugs tight against back seats and cargo walls — giving you maximum bass with minimal space. It’s the kind of smart design that fits real-life vehicles, not just show-floor displays.
  • Simple Hookup, Seamless Integration: With push-in speaker terminals, installation is a breeze. Whether you’re building from scratch or upgrading a legacy system, this passive sub enclosure slides into your setup with zero fuss.
  • Designed for the Driven: With a sensitivity of 90dB and frequency response reaching down to 35Hz, this sub box doesn’t just play low — it grabs hold of your music’s backbone and shakes it loose. Every kick drum, every drop, every rumble — amplified through your own personal tuning.

The FSB10SP is more than a speaker box. It’s a canvas for your creativity, a blank check of bass potential ready to be signed by your amp of choice. For the builders, the perfectionists, the car audio artists — this one’s for you. Own the sound. Command the build. Start with the FSB10SP.

General
Application TypeCar
Qualityexcellent
Model SeriesFSB
Model NumberFSB10SP
Components
Woofer Size & Type10″
Enclosure TypePassive Sealed
ConeBlack Paper
SurroundLaminated Butyl Rubber
Voice Coil2″ ASV
Performance
Power Handling200W RMS / 400W Peak
Frequency Response35Hz – 500Hz
SPL @ 1 W / 1 m90 dB
Impedance4 Ohm
Installation
SlimYes
Unit Dimension (H x L x D)21.0″ x 13.1″ x 5.2~7.3″
Mounting LocationTrunk / Rear Seat Area
Connectivity
InputPush in Terminals

Additional information

Weight 23.38 lbs
Dimensions 25.37 × 11.82 × 17.49 in
Quality

excellent

Model Series

FSB

Application Type

Car

Product Category

enclosure

Reviews

There are no reviews yet.

Be the first to review “FSB10SP Passive Sealed Subwoofer Enclosure | Single 10″ Subwoofer, 200W RMS, 400W Peak”

Your email address will not be published. Required fields are marked *